Sensor CX-400 Ver.2
Liên hệ: 0243 8 771 700
UL , CE , Korean S Mark Approved
UL : Recognition
Korea’s S-mark certification : Some models only
- Miễn phí vận chuyển
- Hỗ trợ kỹ thuật 24/7
- Bảo hành 1 năm, chăm sóc trọn đời
- Giảm gánh nặng môi trường hơn nữa
- Tiêu thụ điện năng ít hơn đến 60% Các dòng sản phẩm khác nhau bao gồm việc bao gồm một mạch tích hợp tùy chỉnh mới được phát triển.
- Dòng CX-400 giúp giảm mức tiêu thụ điện năng lên đến 60%, giảm trung bình 44% khi nâng cấp do thiết kế độc đáo của nó.
- Các cảm biến này làm giảm lượng khí thải carbon và góp phần thân thiện với môi trường.
Strong against oil and coolant liquids [ CX-41□/42□/49□ ]
The lens material for the thru-beam type, retroreflective type (excluding the CX-48□) and the diffuse reflective type are made of a strong acrylic that resists the harmful effects of coolants.
1,000 hours; Immersion (depth 0 m); Insulation resistance 20 MΩ/250 V
|
Strong against ethanol [ CX-44□/48□ ]
A strong, ethanol resistant polycarbonate was used for the front and display covers. Caution: Set the CX-48□ so that cleaning liquid will not get on to the attached reflector. |
Strong infrared beam [ CX-412/413 ]
Remarkable penetrating power enables applications such as package content detection. |
Note: When sensing utilizing penetrating power, make sure to verify using the actual sensor. |
Can sense differences as small as 0.4 mm 0.016 in, with hysteresis of 2 % or less [ CX-441 ]
An advanced optical system provides sensing performance that is 2.5 times approx. than conventional models. Even ultra-small differences of 0.4 mm 0.016 in can be detected accurately.
|
|
Hardly affected by colors [ CX-441 ]
Both black and white objects can be sensed at the same distances. |
The difference in sensing ranges is 1% or less between non-glossy white paper with a setting distance of 50 mm 1.969 in and non-glossy gray paper with a brightness level of 5. |
Retroreflective type with polarizing filters [ CX-491 ]
Built-in polarizing filters ensure stable sensing even on a specular object. |
Introducing the transparent object sensing type sensor [ CX-48□ ]
Our unique optical system and transparent object sensing circuitry provide stable sensing of even thinner transparent objects than the conventional models. |
Transparent objects detectable with CX-48□ (Typical examples)
Sensing object | Sensing object size (mm in) | |
---|---|---|
Glass sheet | 50 × 50 1.969 × 1.969 | t=0.7 t=0.028 |
Cylindrical glass | ø50 ø1.969 ℓ =50 ℓ =1.969 | t=1.3 t=0.051 |
Acrylic board | 50 × 50 1.969 × 1.969 | t=1.0 t=0.039 |
Styrol (Floppy case) | 50 × 50 1.969 × 1.969 | t=0.9 t=0.035 |
Food wrapping film | 50 × 50 1.969 × 1.969 | t=10 μm t=0.394 mil |
Cigarette case film | 50 × 50 1.969 × 1.969 | t=20 μm t=0.787 mil |
Vinyl bag | 50 × 50 1.969 × 1.969 | t=30 μm t=1.181 mil |
Pet bottle (500mℓ) | ø66 ø2.598 |
Reflector setting range | CX-481: 300 to 500 mm 11.811 to 19.685 in CX-482: 1 to 2 m 3.281 to 6.562 ft |
---|
[with the RF-230 reflector at the optimum condition (Note)]
Each object should pass across the beam at the center between the sensor and the reflector.
ℓ : Length of cylindrical glasses
t : Thickness of sensing object
Note: | The optimum condition is defined as the condition in which the sensitivity level is set such that the stability indicator just lights up when the object is absent. |
---|
Long sensing range of 5 m 16.4 ft [ CX-493 ]
A long 5 m 16.4 ft sensing range is possible with the red LED type that is easy to align with the beam axis. Can be used for wide automatic door shutters. |
Ultra-long sensing range of 30 m98.4 ft [ CX-413 ]
The CX-413 achieves the ultra-long sensing range of 30 m 98.4 ft. |
Strong on dust and dirt [ CX-412/413 ]
Because the light source is an infrared light, it is strong on dust and dirt compared to the red beam type. |
Stronger noise resistance
The CX-400 series has a higher noise resistance than its previons model. By incorporating an inverter countermeasure circuit that appropriately shifts with peak wavelength, the sensor now resists high-frequency noise from high-voltage inverter motors and inverter lights more effectively. |
Strong even in cold environments
Stable performance can be maintained even in environments of –25 ℃ –13 ℉.
Thoroughly eliminating unnecessary waste, Reducing many environmental burdens
The CX-400 series has three different cable length types and uses very simple packaging to reduce waste. The bag is made of polyethylene and does not emit toxic gasses. |
Beam axis alignment made easy with a high luminance spot beam [ CX-423 ]
These sensors have a high luminance red LED spot beam which provides bright visibility enabling the sensing position to be checked at a glance. |
The bright spot makes beam axis alignment easy [ CX-44□ ]
These sensors have a high luminance red spot that provides bright visibility. The sensing position can be checked at a glance. |
Reduction of volume adjustment labor [ CX-42□ ]
Because these sensors possess many variations depending on the sensing range, enables you to make optimal volume adjustment easily. |
Can be used for sensing minute differences [ CX-44□ ]
Equipped with a 5-turn adjuster so that even challenging range settings can be handled with ease. |
Basic type available
Omit the sensitivity adjuster and operation mode switch and release a basic type cable 0.5 m 1.641 ft in length. If the usage is clear, quick construction can be performed onsite without detailed adjustments and the cost can be controlled.
Less processing time
M8 plug-in connector type and M12 pigtailed type are available. This contributes to less time spent in setting up. In addition, cable types are available with cable lengths of 0.5 m 1.640 ft, 2 m 6.562 ft and 5 m 16.404 ft. |
BGS/FGS functions make even the most challenging settings possible! [ CX-44□ ]
For details on the operation of the BGS/FGS functions, refer to “BGS/FGS functions” of “PRECAUTIONS FOR PROPER USE”.
The BGS function is best suited for the following case |
Background not present
When object and background are separated
|
|
The FGS function is best suited for the following case |
Background present
When object and background are close together When the object is glossy or uneven
|
|
The sensor judges that an object is present when light is received at position A of the light-receiving element (2-segment element). This is useful if the object and background are far apart. The distance adjustment method is the same as the conventional adjustment method for adjustable range reflective type sensors. |
The sensor judges that an object is present when no light is received at position B of the light-receiving element (2- segment element). Accordingly, even objects that are glossy can be sensed. This is useful if the object and background are close together, or if the object being sensed is glossy. |
Strong against interference
The interference prevention function lets two sensors to be mounted close together precisely.
|
Hãy chọn KSMC:
- Bảo hành sản phẩm 1 năm, chăm sóc khách hàng trọn đời
- Sản phẩm giá cạnh tranh, rẻ nhất tới tay khách hàng
- Sản phẩm chất lượng chính hãng.
- Đội ngũ nhân viên chuyên nghiệp,tận tâm
- Tiến độ chính xác, cam kết hàng cấp ra chính hãng
Đánh giá
Chưa có đánh giá nào.