Specifications

Analog filter (low-pass filter)	10Hz
Number of Measuring Channels	1.0
Applicable transducer	Strain gage transducers
Applicable Bridge Resistance	87.5 to 1000Ω (350Ω, 4 in parallel connection)
Bridge Excitation	2V DC, 30 mA or 4V DC, 50 mA, selectable
Measuring Range	±3.2 mV/V (Including zero Adjustment range)
Sampling rate	Approx. 50 times/sec.
Resolution	64000 counts/input range in both polarities
Calibration function	Actual load calibration, sensitivity-registered calibration, numerical value-registered calibration
Indication Range	-9999 to +9999
Nonlinearity	Within±(0.1% FS ±1 digit)
Stability	Zero : Within ±0.5μVRTI / °C Sensitivity : Within ±0.01%/°C
Decimal Point	Can be put anywhere.
Zero compensation function	Zero function : Any value in the input range can be set to digital zero; execution by key operation or external contact signal
Smoothing Function	Minimum scale : Selectable from 1, 2, 5, 10, 20, 50 or 100 The number of moving averaging times : Selectable from OFF, 2, 4, 8, 16, 32, 64 or 128
Zero compensation function	Zero tracking function : By setting the time, width and operating range Zero approximation : A desired value can be preset to let the indicator read 0 for any signal in a range of 0 to the preset value.
Adding Function	Indicated value at the time of executing zero compensation can be set to a desired value.
Original value display function	Enable to display input value in mV/V
Level test functions	Possible with a desired value input
Control Input	4 (ZERO command, level test command and 2 pattern select commands)
Control Output	3 (HI, OK and LO) Signal format : Open collector Load capacity : 30V DC, 20 mA (resistive load) Comparison/Judgment : Based on high/low limits Judgment Result : 1 (OK) Relative value memory patterns : 4 patterns. Switchable
Analog (D-A) Output	Output signal : ±10 V or 4 to 20 mA, switchable Nonlinearity : Within±0.1% FS Scaling : Can freely be set. Response speed : Approx. 0.25 sec.
EMC Standard	Conforms to IEC61326-1 (class A)
Safety Standard	Conforms to IEC61010-1 (Installation categoryⅡpollution degree 2)
Power Supply	AC 90 to 240V, 50/60 Hz, or 10 to 30 VDC (to be specified when ordering)
Power Consumption	Approx. 6 VA (AC operation), approx. 8 W (DC operation)
Operating Temperature Range	-10 to 50°C
Dimensions	96(W) x 48(H) x 142(D) mm (with no option)
Panel Cut Dimensions	92.2 (+0.4/-0) × 45.2 (+0.4/-0) Panel thickness : 0.8 to 5.0 mm
Weight	Approx. 500 g

Standard Accessories	Unit seal, Instruction Manual

Optional Accessories

Optional Accessories	AC power cables P-23 (for 100 VAC), P-28 (for 200 VAC) BCD output cable N-43 BCD output printer cable N-44