Hỗ trợ trực tuyến

Hỗ trợ kỹ thuât

(+84-4)38771700
  • Sản phẩm bán chạy
  • Panasonic Product

  • Hakko Products

  • SMC Product

  • Schleuniger Products

  • RKC Product

  • adpack products

  • kyowa product

  • t-h-m product

  • Rgl product

  • OTSUKA products

  • OSAWA productS

  • ANEST

  • Other Product


Thông tin: Your browser does not accept cookies. To put products into your cart and purchase them you need to enable cookies.

WGA-710C-0

Giá: Liên hệ
dsada

Type

AC Power Voltage 100V
BCD data output No
DA Compact No
High/low limit Comparative function Yes
EIA-232-D(RS-232C) No
8-step comparator No
Analog amplifier No
Peak hold function Yes

Specifications

Power Supply AC100V±10%, 50/60Hz 20VA or less, DC11 to 30V on request
Applicable Bridge Resistance 87.5Ω to 10kΩ(Up to 4 transducers with 350Ωbridge resistance can be connected in parallel)
Measuring Range ±3.2mV/V(±6400μm/m)
Sampling rate Approx. 15 times/sec.
Bridge Excitation DC10V, 5V, 2.5V (selectable by the switch) Remote sensing possible for 120mA or less
Number of Measuring Channels 1.0
Hold functions ON/OFF switchover : by panel key or external contact input
Weight Approx. 1.7 kg
Stability Sensitivity : ±0.01%/°C, ±0.05% FS, 10% power voltage
Zero : ±0.25μVRTI / °C, ±0.05%FS, 10% power voltage
TEDS Compatible Applicable transducer : Should have the information according to IEEE. Template No.33. Cable length should be 30m or less (Remote sensing cannot be used together with TEDS )
Interface : Compatible with IEEE1451.4 Mixed Mode Transducer Interface Class2
Hold functions Frequency response range : DC to 1kHz
High/low limit Comparative function Response time : 200ms or less
Input Mode Balanced differential
High/low limit Comparative function Contact output : relay contact (1 transfer circuit/point)
Contact capacity : AC250V, 0.5A (resistive load)
Input Terminal Board Gage clamp type
High/low limit Comparative function Number of setting points : 2 (high limit, low limit)
Setting range : 0000 to ±9999
Adding Function Setting range : 0000 to ±9999
Digital Filter Function The number of moving averaging times : 4, 8, 16, 32, 48 or 64 times
Input Impedance 10MΩ or more
Zero tracking function Setting : Setting is made by panel keys
Digital Zero Adjustment Range Action input : by panel key or external contact input
Zero tracking function Range : Zero can be traced in changing quantities of ±1, 2, 5 counts each for delays of 20, 10 and 5 seconds, 9 ranges in total
Digital Filter Function Setting : Setting is made by panel keys
Zero and Sensitivity Adjustment Automatic by internal calculation (accuracy within ±0.1%FS)
Hold functions Mode switchover : ON/OFF Switchover by panel key: No hold, point-based hold, peak hold, section-based peak hold, time-based peak hold
Original Value Monitor Accuracy : Within ±0.1%FS
Applicable transducer Strain gage transducers
Indicator Max. ±9999 (Decimal point can be put anywhere); Character height 10mm, red LED; Lowest place digit can be fixed to 0.
Operating Temperature/Humidity Range -10 to 40°C, 80%RH or less (noncondensing)
Dimensions 72(W)×144(H)×188(D)mm (excluding protrusions)
Nonlinearity Within ±(0.03%FS+1digit) (with transducer output 0.5mV/V)
Panel Cut Dimensions 136×68mm
Model WGA-710C-0
Standard Accessories AC power cable P-23 for AC 100V Spare fuse, Miniature screwdriver for terminal board connection Unit seal Panel mounting fixture BCD output connector BCD-CONNE (57-30360 (DDK) or the equivalent; attached to WGA-710C-1, 12, 14 only), Instruction Manual

Optional Accessories

Optional Accessories AC power cable P-28 for AC 200V

Last Updated: Thứ bảy, 18 Tháng mười một 2017 04:03