| Power Supply |
AC100V±10%, 50/60Hz 20VA or less, DC11 to 30V on request |
|---|
| Applicable Bridge Resistance |
87.5Ω to 10kΩ(Up to 4 transducers with 350Ωbridge resistance can be connected in parallel) |
|---|
| Measuring Range |
±3.2mV/V(±6400μm/m) |
|---|
| Sampling rate |
Approx. 15 times/sec. |
|---|
| Bridge Excitation |
DC10V, 5V, 2.5V (selectable by the switch) Remote sensing possible for 120mA or less |
|---|
| Number of Measuring Channels |
1.0 |
|---|
| Hold functions |
ON/OFF switchover : by panel key or external contact input |
|---|
| Weight |
Approx. 1.7 kg |
|---|
| Stability |
Sensitivity : ±0.01%/°C, ±0.05% FS, 10% power voltage
Zero : ±0.25μVRTI / °C, ±0.05%FS, 10% power voltage |
|---|
| TEDS Compatible |
Applicable transducer : Should have the information according to IEEE. Template No.33. Cable length should be 30m or less (Remote sensing cannot be used together with TEDS )
Interface : Compatible with IEEE1451.4 Mixed Mode Transducer Interface Class2 |
|---|
| Hold functions |
Frequency response range : DC to 1kHz |
|---|
| High/low limit Comparative function |
Response time : 200ms or less |
|---|
| Input Mode |
Balanced differential |
|---|
| High/low limit Comparative function |
Contact output : relay contact (1 transfer circuit/point)
Contact capacity : AC250V, 0.5A (resistive load) |
|---|
| Input Terminal Board |
Gage clamp type |
|---|
| High/low limit Comparative function |
Number of setting points : 2 (high limit, low limit)
Setting range : 0000 to ±9999 |
|---|
| Adding Function |
Setting range : 0000 to ±9999 |
|---|
| Digital Filter Function |
The number of moving averaging times : 4, 8, 16, 32, 48 or 64 times |
|---|
| Input Impedance |
10MΩ or more |
|---|
| Zero tracking function |
Setting : Setting is made by panel keys |
|---|
| Digital Zero Adjustment Range |
Action input : by panel key or external contact input |
|---|
| Zero tracking function |
Range : Zero can be traced in changing quantities of ±1, 2, 5 counts each for delays of 20, 10 and 5 seconds, 9 ranges in total |
|---|
| Digital Filter Function |
Setting : Setting is made by panel keys |
|---|
| Zero and Sensitivity Adjustment |
Automatic by internal calculation (accuracy within ±0.1%FS) |
|---|
| Hold functions |
Mode switchover : ON/OFF Switchover by panel key: No hold, point-based hold, peak hold, section-based peak hold, time-based peak hold |
|---|
| Original Value Monitor |
Accuracy : Within ±0.1%FS |
|---|
| Applicable transducer |
Strain gage transducers |
|---|
| Indicator |
Max. ±9999 (Decimal point can be put anywhere); Character height 10mm, red LED; Lowest place digit can be fixed to 0. |
|---|
| Operating Temperature/Humidity Range |
-10 to 40°C, 80%RH or less (noncondensing) |
|---|
| Dimensions |
72(W)×144(H)×188(D)mm (excluding protrusions) |
|---|
| Nonlinearity |
Within ±(0.03%FS+1digit) (with transducer output 0.5mV/V) |
|---|
| Panel Cut Dimensions |
136×68mm |
|---|
