Hỗ trợ trực tuyến

Hỗ trợ kỹ thuât

(+84-4)38771700
  • Selling products
  • Panasonic Product

  • Hakko Products

  • SMC Product

  • Schleuniger Products

  • RKC Product

  • adpack products

  • kyowa product

  • t-h-m product

  • Rgl product

  • OTSUKA products

  • OSAWA productS

  • ANEST

  • Other Product

Info: Your browser does not accept cookies. To put products into your cart and purchase them you need to enable cookies.

SemiRigid 1050

Price: Liên hệ
dsada

Tổng quan

Overview

Programmable stripping machine for semi-rigid coaxial cables up to 4.50 mm (0.177”) outer diameter and strip lengths up to 30 mm (1.18”).

  • High precision and well-proven mechanics compared to the previous model SemiRigid 1000
  • User friendly high resolution 7” color touchscreen
  • Intuitive and easy programming thanks to the excellent menu navigation and predefined cable ends
  • Many useful wizards for machine setup and maintenance
  • Appealing design and ergonomics


Ứng Dụng

Processing Capabilities

  • Stripping and pointing of inner conductor
  • Stripping (groove only) of outer conductor
  • Stripping and pointing of inner conductor on cable with soldered connector already in place

Application Range

Semi-rigid coaxial cables from 0.86 (0.034”) up to 4.50 mm (0.177”) outer diameter and strip lengths from 0.10 (0.004”) up to 30 mm (1.18”).


Thông số kỹ thuật

Technical Data

Cable Diameter Max. 4.50 mm (0.177“)
Min. 0.86 mm (0.034“)
Stripping Length Max. 30 mm (1.18“)
Increments Length: 0.01 mm (0.00039“) steps
Diameter: 0.01 mm (0.00039“) steps
Stripping Blades For turning and removing: 2 pcs.
For turning: 2 pcs. (1 each)
For pointing: 1 set (4 pcs.)
Cycle Rate > 3 s, (depending upon cable type and programming)
Program Capacity 1‘000 cables
Interfaces 2x USB "Host", Footpedal, Ethernet (on request)
Noise Level < 70 db (A)
Power Supply

100/115 VAC, 230/240 VAC, 150 VA, 50/60 Hz

Air Pressure 6 bar / 0.6 MPa / 87 psi
Air Consumption per Cycle 7-30 l at 6 bar (87 psi), (depending upon cable type and programming)
Dimensions
(L x W x H)
566 x 215 x 252 mm (22.3 x 8.5 x 9.9“)
Weight Net 19.5 kg (43 lbs)
CE – Conformity The SemiRigid 1050 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Important Note Schleuniger recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine.


Last Updated: Saturday, 18 November 2017 02:12