Tổng quan
Overview
Schleuniger's PullTester 28 is a dual-range, motorized benchtop device designed to measure pull forces of wire crimp connections as well as ultrasonic metal welding connections on a wider range of wire than single-range pull test devices. The PullTester 28 is specially suited for quality assurance in a production environment.
- Speed controlled motor provides extremely consistent readings
- 3 pulling modes for destructive & non-destructive tests
- Simple LCD display for easy programming and read out
- Standard RS 232 interface for curve analysis and downloading test data
- Networking capabilites
Ứng Dụng
Application Range
This versatile machine has two versions depending on the required force range. Both versions include two measuring ranges, which are individually calibrated enabling use of its smaller range for small cables, while easily switching to its larger range for larger cables. This dual-range capability ensures the highest accuracy for the widest range of applications. Special force ranges may be possible if needed.
■ PullTester 28 : 2,000 / 5,000 N (440 / 1100 lbf)
■ PullTester 28-10 (special): 5,000 / 10,000 N (1100 / 2200 lbf)
Hand actuated or pneumatic pull test devices can give inconsistent data depending on the operator or pull rate. Some standards specify that a test device must pull with a consistent rate. The Schleuniger PullTester 28 is equipped with a speed-controlled motor, ensuring consistent pull rates throughout the measuring range resulting in repeatable and accurate data. Pull forces can be measured in pounds force, Newtons or kiloponds. Terminal holders and quick-change options can be designed and manufactured based on your application. In addition, a variety of terminal holders are available upon request.
Thông số kỹ thuật
Technical Data
Measuring Range | Standard: 2,000 / 5,000 N (440 / 1100 lbs.) Special: 5,000 / 10,000 N (1100 / 2200 lbs.) Other combinations possible |
Units of Measure | Newton (N), Kilopond (Kp), Pound (lbf) |
Display | Upper: LCD 6-digit for force readings Lower: LCD 4-line for programming and operation |
Applied Force Accuracy | 0.2% of full scale |
Stroke Max. | 80 mm (3.14”) |
Pulling Speed | 4 speeds: 50, 75, 100 mm/min. or high speed (1.97, 2.95, 3.94”/min. or high speed) |
Pulling Modes | Pull + Break, Pull + Return, Pull + Hold |
Memory | Up to 48 jobs with 50 measurements for each job (2400 measurements in total) |
Monitoring | Device display output; Optional WinCrimp statistical software for visual force-time graph on a PC and statistical analysis for evaluation with simple transfer capability to Microsoft® Excel. |
Safety | IP 20 |
Interfaces | RS 232 |
Network |
Multiple devices in combination with crimp force monitor and crimp height measurements device via WinCrimp software with either RS232 or TCP/IP. |
Dimensions (L x W x H) |
640 x 400 x 300 mm (25” x 16” x 12”) |
Weight | 45 kg (101 lbs.) |
CE-Conformity | The PullTester 28 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility. |